สร้างความแตกต่างให้กับลูกค้าของเรา
02-136-1770

ธันเดอร์เลเซอร์ ประเทศไทย

Desktop laser cutter

Release Time:2019/07/01 laser machine Browsing Times:17414

Work Area: 600×400

With a reasonable size, the Nova24 laser is really good suitable for users who have very little are limited on space. Though the size is small, its ability for cutting and engraving is also as good as the big our larger machines. The desktop model is especially good convenient for customers who need to make customized products.

Close it
Customer submit application
Name
Email
Comments and Message
 

Standard Features

laser engraver Hybrid servo motor

Hybrid servo motor
1000mm/s speed for engraving photo, super smooth vector cutting quality.
laser engraver Smart board

Smart board
Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Laser software

Laser software
RDWorksV8 laser software.
laser engraver LCD panel

LCD panel
Set speed, power, and more directly from the LCD panel.
laser engraver Auto focus

Auto focus
Help the user to set focus Easier. (based on motorized table)
laser engraver Motorized table

Motorized table
Control the table up/down from LCD panel directly
laser engraver Honey comb table

Honey comb table
Reduces underside reflections.
laser engraver Aluminum blade cutting table

Aluminum blade cutting table
Reduce the influence of the reflection of laser.
laser 3D Engrave

3D Engrave
Engrave high quality 3D photos directly.
laser 3D cutting

3D cutting
Achieve “3D cutting” on some materials
laser engraver Parameter library

Parameter library
Help you to save times.
laser engraver Color mapping

Color mapping
Change the working speeds and power by using color settings.
laser engraver Visible Red Dot Pointer

Visible Red Dot Pointer
Make the laser beam “visible”.
High quality laser tube

High quality laser tube
Every laser tube must pass the strict quality control test.
laser engraver High quality optics

High quality optics
High quality optics.
laser engraver Mirror mount

Mirror mount
Thunderlaser easily re-adjusting 3D mirror mounts.
laser engraver Connection ways

Connection ways
High-speed Ethernet line or the USB cable line.
laser engraver USB disk

USB disk interface
Thunder laser system supports the USB disk loading.
laser engraver Free Home position

Free Home position
Freely change the starting position.
laser engraver Large buffer memory

Large buffer memory
You can take the file directly from the memory.
laser engraver Emergency stop

Emergency stop
Turn off the machine immediately when there is an accident.
laser engraver flap protection

Open flap protection
Laser will stop working if you open the front cover.
laser engraver Water protection

Water protection
Laser will stop working if the water cooling system is not working
laser engraver Alarm Lamp

Alarm Lamp
Show the work state and tell when the job is done, more safe for you.
Standard laser head

Standard laser head
It is the most often used head.
laser engraver Air assist

Air assist
Blowing air to prevent the material being burned
laser engraver machine case

The strong machine case
Improve the laser machine performance.
laser engraver Exhaust system

Exhaust system
Ensure the work pieces and laser cutter machine inside be clean.
laser engraver Drive belts

Drive belts
This belt is stable performance with long life, wearable and durable.
laser engraver Low-noise cooling fan

Low-noise cooling fan
Operate the laser in a quiet and comfortable surroundings.
laser engraver High quality rails

High quality rails
Keep the engraving/cutting precise and very durable.

Technical Specifications

Laser System NOVA 24
Laser Tube Wattage 40-60Watt
Work Area 600x400mm(23.6″ x 15.7″)
Max Part Size (WxLxH) Front door closed

700x530x170mm(27.6″ x 20.9″ x6.7″)

Pass-through door

700x∞x15mm(27.6″ x ∞” x 0.6″)

Table Size 700x530mm(27.6″ x 20.9″)
Z Axis Height 155mm(6.1″)
Dimensions(WxDxH)

1070x810x610mm(42.1″ x 31.9″ x24″)

Net Weight 130kgs(287lbs)
Laser Type Sealed Co2 Glass Laser Tube
Cooling Water Cooled
Motion Control System High-Speed Hybrid servo motor
Maximum Speed 1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth) Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes Optimized raster, vector, and combined mode
Resolution(DPI) User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface Ethernet and USB Connection
Compatible Operating Systems Windows XP/2000/Vista/7/8/10
Buffer Memory 128MB Standard
Display Panel 3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements 110 to 240 volts, 50 or 60 Hz, single phase
Ventilation System Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.

Machine Size

nova24 size laser cutter nova24-60w size laser cutter

Optional Items

laser engraver
Water Chiller When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.
laser engraver
Rotary Axis Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…
laser engraver
Heat Alarm Detector A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…
laser engraver
HR laser head We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…
laser engraver
4″ laser head 4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…
laser engraver
Air compressor The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…

Materials

If your material is not in the below list, our Applications Team would be happy to assist you to test it.
Materials Engrave Cut
Wood
Acrylic
Delrin

Cloth

Leather
Mat Board
Melamine

Paper
Mylar
Pressboard
Rubber
Wood Veneer
Fiberglass
Plastic
Cork
Corian
Twill
Anodized Aluminum X
Painted Metals X
Tile X
Glass X
Coated Metals X
Ceramics X
Marble X
Stainless Steel * X
Brass * X
Titanium * X
Bare Metal * X
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.

Video

FAQ

No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.
Both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10.
Our laser runs on Windows XP/2000/Vista/7/8/10 both 32bits and 64bits system. But it does not run on Mac OS.
CorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.
JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW
Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.
the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube) https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html
As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too. https://www.thunderlaserthai.com/video/what-laser-cutter-can-create.html https://www.thunderlaserthai.com/video/how-to-use-your-laser-machine.html https://www.thunderlaserthai.com/video/how-to-use-your-laser-software.html
No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
Related Pages
  • laser engraver Desktop Laser System

    Nova24 – Laser System   With a reasonable size, the Nova24 laser is real…

  • laser engraver Nova 63

    Nova – Laser System   The NOVA laser cutter carries all the best functio…

  • laser engraver Mars Laser Cutter

    Mars – Laser System   Installed with the high speed servo motor systems,…

  • laser engraver Nova 51

    Nova – Laser System   The NOVA laser cutter carries all the best functio…

  • laser engraver Class 1 Laser Cutter

    Class 1 Nova – Laser System   Class 1 laser cutter comes with the same f…