Thunder Laser successfull…
Release Time:2019/06/01Browsing Times:787
Here are the reasons: ● The starting point is set to absolute coordinate in software. Locate on the bottom left corner, the option of “Position” please select to Current positio...
Release Time:2019/06/01Browsing Times:778
Scenario 1: If the vector has overlapped paths and it will be cut repeatedly. Solution: In RDworks, you can use “Delete overlap” tool to delete all overlapped paths, like...
Release Time:2019/06/01Browsing Times:1954
Note: the laser machine can only burn into or through material. Also, the beam can only be made to follow straight or curved paths or to burn a grid of dots (a bitmap image). There is no way for ...
Release Time:2019/06/01Browsing Times:802
The engraving quality working on x-swing is generally worse than x-unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. In ...