Thunder Laser successfull…
Standard Features
Technical Specifications
| Laser System | NOVA 51 | ||
| Laser Tube Wattage | 100-130Watt | ||
| Work Area | 1300x900mm(51.2″x35.4″) | ||
| Max Part Size (WxLxH) | Front door closed |
1400x1030x230mm(55.1″ x 40.6″ x9.0″) |
|
| Pass-through door |
1400x∞x20mm(55.1″ x ∞” x0.8″) |
||
| Table Size | 1400x1030mm(55.1″ x40.6″) | ||
| Z Axis Height | 155mm(6.1″) | ||
| Dimensions(WxDxH) |
1900x1405x1040mm(74.8″ x 55.3″ x40.9″) |
||
| Net Weight | 430kgs(948lbs) | ||
| Laser Type | Sealed Co2 Glass Laser Tube | ||
| Cooling | Water Cooled | ||
| Motion Control System | High-Speed Hybrid servo motor | ||
| Maximum Speed | 1000mm/S(39.4 IPS) | ||
| Speed and Power Control (engraving depth) | Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. | ||
| Operating Modes | Optimized raster, vector, and combined mode | ||
| Resolution(DPI) | User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head) | ||
| Computer Interface | Ethernet and USB Connection | ||
| Compatible Operating Systems | Windows XP/2000/Vista/7/8/10 | ||
| Buffer Memory | 128MB Standard | ||
| Display Panel | 3.5″ LCD panel showing current file, total working time, laser power, speed etc. | ||
| Electrical Requirements | 110 to 240 volts, 50 or 60 Hz, single phase | ||
| Ventilation System | Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case. | ||
Machine Size
Optional Items
Air-pressure control sensor
The Air-pressure control sensor made by Thunder Laser can measure the air pressure and indicate the air-pressure value in real time.it can set to measure even 0.01Mpa air pressure, it’s valid for both air pump and high pressure air compressor…
The Air-pressure control sensor made by Thunder Laser can measure the air pressure and indicate the air-pressure value in real time.it can set to measure even 0.01Mpa air pressure, it’s valid for both air pump and high pressure air compressor…
Rotary Axis
Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…
Heat Alarm Detector
A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…
HR laser head
We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…
4″ laser head
4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…
Air compressor
The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…
Materials
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.
| Materials | Engrave | Cut |
| Wood | √ | √ |
| Acrylic | √ | √ |
| Delrin |
√ |
√ |
| Cloth |
√ |
√ |
| Leather | √ | √ |
| Mat Board | √ | √ |
| Melamine |
√ |
√ |
| Paper | √ | √ |
| Mylar | √ | √ |
| Pressboard | √ | √ |
| Rubber | √ | √ |
| Wood Veneer | √ | √ |
| Fiberglass | √ | √ |
| Plastic | √ | √ |
| Cork | √ | √ |
| Corian | √ | √ |
| Twill | √ | √ |
| Anodized Aluminum | √ | X |
| Painted Metals | √ | X |
| Tile | √ | X |
| Glass | √ | X |
| Coated Metals | √ | X |
| Ceramics | √ | X |
| Marble | √ | X |
| Stainless Steel | * | X |
| Brass | * | X |
| Titanium | * | X |
| Bare Metal | * | X |
Video
FAQ
No need. We’ve added a parameter library in the software, once you find out what settings is best for a certain material;you can record it in the parameter library. Next time you cut the same material, you just need to read it from the list.
Both ok, as long as your operating system is Windows XP/2000/Vista/7/8/10.
Our laser runs on Windows XP/2000/Vista/7/8/10 both 32bits and 64bits system.
But it does not run on Mac OS.
CorelDraw and AutoCAD are suggested. You can design all your artworks in these two software and then send to the RDWorks software to set the parameters easily.
JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW
Yes, you can take a photo by using a camera and then load the photo to the software directly and engrave it.
the laser machine is ready to work, the exhaust fan and the air pump and the water pump are included. (But when you using a big power laser tube, it is suggested to buy a water chiller for cooling the laser tube)
https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html
https://www.thunderlaserthai.com/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html
As long as you know how to design jobs in graphic software, it just takes a few hours for you to become a master of laser machine. You just need to do some tests to know what speed and power is good for different materials. Since we’ve provided some of the parameter library, it will save you more time.You can watch the guiding videos from our website to learn how to use the machine in advance too.
https://www.thunderlaserthai.com/video/what-laser-cutter-can-create.html
https://www.thunderlaserthai.com/video/how-to-use-your-laser-machine.html
https://www.thunderlaserthai.com/video/how-to-use-your-laser-software.html
Please watch this video directly to learn the detail
https://www.thunderlaserthai.com/video/how-to-use-your-laser-software.html
No, our laser machine can do both cutting and engraving very well.You just need one machine for both kinds of jobs.
